Stage 7) Making the fretboard.

Select a premium grade of wood for the fretboard. I bring the stock down on my drum sander so after gluing, my fretboard and neck blank thickness will be 1.010″ when finished. I will explain a little later in the backside routing process the need for the .010″ extra stock. Before I route the radius into the fretboard I use a Jet 16-32 Drum Sander and take the stock down close to my total neck thickness using 80 grit sand papersand paper. A great tip for loaded up sandpaper is using Gorilla Tape to stick to the buildup. after several stick and re-sticking applications, you will see a major improvement in stock removal. Using the fretboard template, I draw out the fretboard shape on your stock. For darker woods I use a Prismacolor Premier Colored Pencil, True Green Lead. For some reason this color stands out on the widest variety of wood species. On maple, I just use a mechanical pencil with 0.5mm or 0.7mm lead . Next, we put the centerline down the Neck.

Hollywood Series in Python

Hollywood Series in Python

  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

<span>%d</span> bloggers like this: