Archive for February 11th, 2012

Stage 10) Profile shaping

After the clamps are removed from the work we did in Stage 10, it’s time to mount the neck to the wooden template using two way tape. Use clamping pressure in order to have a good bond between the neck blank and the wooden template. I use the 3 inch Robo sander inserted into my floor mounted drill press to sand the profile of the neck. The wheel of the Robo sander rides on the wooden template and the sanding drum removes the extra stock we left in Stage 3. When the 3 inch sander has removed all it can, I take out the 3 inch Robo sander and finish up the neck with the 1 inch Robo sander to clean up the tighter curves at the headstock. In Stage 12, I will discuss the neck radius process. Stay tuned! Jim at jcsmi.com

Acoustic fretboard

Acoustic fretboard By JCS Musical instruments