Stage 17) Drilling the tuner holes.

Using a template with the center lines for the tuner key locations, pencil the center point of the holes onto the headstock. Next, set up the drill press with the recommended drill bit for the tuners recommend size. Make sure to use a brad point drill bit to get the cleanest cut at the top face and back of the hole. Next, we need to have a backing plate of wood to put behind the headstock so the drill bit does not tear out the grain on the back side of the headstock. After all holes are drilled, block sand top and back with 150 grit 3M sanding paper.

  1. No matter if some onee searches for his vital thing, thus he/she needs to
    be available that in detail, thus that thng iis maintained over here.

  1. No trackbacks yet.

Leave a Reply to Brigitte Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: